Company base: Sugar Land, Texas · Nationwide sales · Tommy Marco

346-276-9540 tommy@jjtransformers.com

New OEM transformer supply

Dry-Type Transformer Supply and Quotations

Request dry-type transformer quotations from 500 kVA, including 2 MVA project requirements. State primary/secondary voltage, frequency, cast-resin or VPI construction, conductor, enclosure and quantity. Indoor or outdoor suitability and delivery are confirmed for the quoted configuration. Ask Tommy for the proposed factory scope, technical documents and quotation.

J&J Transformers LLC · Sugar Land, Texas · Serving projects nationwide

For project teams buying dry-type transformers by exact construction and quantity. Send kVA, voltages, cast-resin or VPI requirement, winding material, enclosure, quantity and needed-on-site date.

Tommy Marco · tommy@jjtransformers.com

Requested range
500–10,000 kVA / up to 10 MVA
Construction
Cast-resin or VPI by quotation
Delivery
9-week OEM target
Delivered scope
DDP in confirmed quote
Jump to a section
Cast-resin dry-type transformer shown in the supplied Eaton Jiangsu factory brochure
Eaton factory-brochure example. The quoted transformer has its own ratings, enclosure, drawings and confirmed manufacturing entity.

Nine-week OEM target for your project schedule

J&J targets nine weeks for qualifying new OEM equipment, including pad-mounted and dry-type transformers from 500 to 10,000 kVA, switchgear and breakers. The target includes manufacturing, agreed factory testing and shipping to the quoted destination after PO, approved drawings and production release. The factory confirms the configuration, quantity, production slot and site-arrival date in the written quotation. Large high-voltage power transformers have a separate unit-specific release and delivery schedule.

500 kVA and larger: single-unit, bulk and phased transformer orders

J&J quotes new OEM pad-mounted and dry-type transformer requirements from 500 to 10,000 kVA. Send a quantity for each electrical configuration and arrival phase. Ratings below are quotation groups; the requested design, manufacturer, listing and factory allocation are confirmed for the actual order.

OEM quotation sizes for 500 kVA+ equipment
Requested kVAMVA equivalentOrder information
500 kVA0.5 MVAQuote voltage ratio, quantity, construction and required delivery phase
750 kVA0.75 MVAQuote voltage ratio, quantity, construction and required delivery phase
1,000 kVA1 MVAQuote voltage ratio, quantity, construction and required delivery phase
1,500 kVA1.5 MVAQuote voltage ratio, quantity, construction and required delivery phase
2,000 kVA2 MVAQuote voltage ratio, quantity, construction and required delivery phase
2,500 kVA2.5 MVAQuote voltage ratio, quantity, construction and required delivery phase
3,000 kVA3 MVAQuote voltage ratio, quantity, construction and required delivery phase
4,000 kVA4 MVAQuote voltage ratio, quantity, construction and required delivery phase
5,000 kVA5 MVAQuote voltage ratio, quantity, construction and required delivery phase
7,500 kVA7.5 MVAQuote voltage ratio, quantity, construction and required delivery phase
10,000 kVA10 MVAQuote voltage ratio, quantity, construction and required delivery phase

Quote the complete dry-type transformer configuration

A 2000 kVA label does not describe the full transformer. Keep voltage ratio, frequency, winding connection, impedance, taps, cooling and enclosure beside the required capacity. Identify the specified copper or aluminum conductor rather than assuming it from a photograph.

Dry-type transformer information for a comparable offer
InputWhat to send
Electrical dutykVA/MVA, primary and secondary voltages, phase, frequency and winding connection.
Build requirementsCast-resin or VPI, conductor, impedance, taps, insulation, temperature rise and cooling.
Site interfacesIndoor/outdoor enclosure, dimensions, ventilation requirements and cable or bus connections.
AcceptanceRequired drawings, tests, listings or certifications and supporting model-specific evidence.

Cast-resin and VPI transformer requests

Eaton publishes cast-resin and VPI dry-type product families. Specify the construction required by your project and request the proposed design's technical package. A catalog example does not establish every voltage, frequency or listing for your order.

For a 12.47 kV to 415 V or 480 V requirement, include the complete secondary connection and neutral arrangement. Ask for losses, sound, enclosure and temperature-monitoring details where the specification requires them. Compare the proposed cooling basis with the continuous load your engineer has approved.

Separate configuration groups and delivery phases

For bulk dry-type transformer orders, list each configuration once with its quantity and required release. Separate spares and optional units from the equipment needed for the first phase.

Planning example: a request for twelve 2000 kVA units in two six-unit deliveries should retain both delivery dates, one approved configuration revision and any two optional spares as a separate line. This is an inquiry format, not an available equipment lot or a delivery promise.

9-week OEM delivery target with DDP

The 9-week delivery target covers all listed OEM equipment, including transformers through 10 MVA / 10,000 kVA. This total window includes manufacturing, factory testing and shipping to the customer’s site. It starts after PO, approved drawings and the agreed commercial production release. The quotation confirms configuration, quantity, factory allocation, destination and the arrival date.

DDP is included in the confirmed quotation: agreed freight, import clearance and applicable import duties to the named delivery point. Offloading, installation, field testing and commissioning are separate unless expressly included. Equipment above 10 MVA has a separately reviewed schedule.

Send Tommy your equipment requirement

Email tommy@jjtransformers.com or call Tommy Marco at 346-276-9540. Send kVA, voltages, construction, quantity, destination and required date, plus the specification or available drawings.

J&J Transformers LLC is your independent equipment supplier. The written offer identifies the manufacturer, model, manufacturing entity, required compliance evidence, warranty terms and included equipment. Existing new, unused and pre-owned inventory is reviewed separately from these new-build requests.

Match the exact step-down secondary voltage

For three-phase distribution step-down service, send primary kV, secondary voltage and connection, kVA, grounding, frequency and installation requirements. Common project requests include 480Y/277 V, 208Y/120 V and 415 V outputs; actual product configurations and current supply are confirmed by quotation. A high-voltage substation transformer may need additional transformation to reach these load voltages.

Dry-type, cast-resin and VPI purchase specifications

For a dry-type transformer for sale, identify kVA, primary/secondary voltage, phase, frequency, enclosure and installation environment. Cast-resin and vacuum-pressure-impregnated (VPI) construction are specific requirements to confirm for the quoted candidate, not interchangeable labels.

  • Include ventilation, ambient temperature, altitude, temperature rise, insulation class, sound constraints and indoor/outdoor enclosure requirements.
  • Request winding connections, dimensions, losses and available test records, and confirm the cooling rating used for the proposed load.

Evidence path for a dry-type transformer order

Use three separate records: the public screening facts, the private technical package and the written commercial offer. This keeps a useful buying page from being mistaken for a technical approval, guaranteed allocation or delivery commitment.

J&J shares sensitive serial-specific and seller documents directly after the equipment and project requirement are qualified. Public pages do not disclose private owner, customer, supplier or storage information.

Evidence to retain before purchase approval
Evidence stageWhat to confirm
Public screening recordThe buying page defines the required kVA, voltage ratio, winding material, cast-resin or VPI construction, enclosure and quantity instead of treating every dry type as the same product.
Private technical packageRequest the offered model, drawings, dimensions, winding and insulation data, enclosure details, listing or certification evidence required by the project and the agreed factory test scope.
Written commercial offerThe written quotation confirms the manufacturing entity, exact configuration, quantity, factory release requirements, warranty, DDP destination and site-arrival target.

For worksheets, specifications or supporting documents, call 346-276-9540 or email tommy@jjtransformers.com. Files are shared directly after contact.

Common questions

Written quotes and supporting records control unit-specific ratings, availability, condition, price, and delivery.

Can J&J quote 2000 kVA or 2 MVA dry-type transformers?

Yes. J&J accepts 2000 kVA / 2 MVA new-build requirements and other requests through 10 MVA. Send the complete electrical configuration, construction, quantity and destination. The written quote confirms the design and supply schedule.

Can I request copper windings or a VPI transformer?

Yes. Identify conductor and construction requirements in the specification. J&J confirms the proposed manufacturer's design and available configuration in the quotation; a generic product image does not establish those details.

Are all dry-type transformer sizes in stock?

This page covers new manufacturing quotations rather than stocked units at every rating. Existing inventory has separate equipment records. Availability and factory allocation are confirmed for the selected supply offer.

What should I compare in a dry-type transformer delivered price?

Compare the same build, enclosure, accessories, drawings, tests and named delivery point. Identify DDP inclusions, offloading and field-work exclusions, warranty terms and the confirmed arrival milestone beside the equipment price.

Can I specify cast-resin or VPI construction in a dry-type transformer inquiry?

Yes. State the required construction, voltage/kVA, enclosure and environment. J&J checks the candidate's documentation and supply options against that request. Construction, condition, compliance and availability must be confirmed for the actual quoted unit.

Call Email Sales