Your equipment shortlist
Compare equipment before you request it.
Review the published facts side by side. Matching a voltage or MVA rating does not establish compatibility. Ask your project engineer to review the complete unit records.
| Compare | Two CAT 3516C 2000 kW 480V Diesel GeneratorsJJ-GEN-CAT3516C-2 | 100 Used Cummins QSK60 G5 1.3 MW GeneratorsJJ-GEN-QSK60-USED |
|---|---|---|
| Manufacturer | Caterpillar | Cummins |
| Rating / output | 2,000 kW / 2,500 kVA standby at 0.8 power factor on photographed unit | 1.3 MW per unit; confirm the required frequency and duty in the unit schedule |
| Voltage / winding arrangement | 480 V, three-phase | Unit-specific output voltage confirmed with quotation |
| Vector group | Wye, series connection; six leads on photographed nameplate | Not applicable; generator connection per technical package |
| Frequency | 60 Hz on photographed unit | 50/60 Hz; required configuration confirmed per unit |
| Cooling | Not documented; confirm with J&J | Not documented; confirm with J&J |
| Impedance and base | Not documented; confirm with J&J | Not documented; confirm with J&J |
| Tap changer | Not documented; confirm with J&J | Not documented; confirm with J&J |
| Insulation / BIL | Not documented; confirm with J&J | Not documented; confirm with J&J |
| Quantity represented | 2 units | 100 units |
| Technical details / open items | Two units offered by J&J on October 29, 2026. The repeated tag photos document one unit, rather than two distinct serial-number records.; Photographed Caterpillar nameplate: 3516C engine model; standby duty; 2,000 kW / 2,500 kVA at 0.8 power factor. This is a standby rating; no prime or continuous output is established by the supplied tag.; Electrical nameplate: 480 V, three-phase, 60 Hz, 3,007 A and 1,800 RPM; wye, series connection with six leads.; October 2016 manufacture is shown on the photographed generator-set nameplate. Confirm the second unit’s manufacture date, ratings, electrical configuration and matching records before allocation.; Class H insulation; frame 1625; rated ambient 40 °C and altitude 1,000 m. NEMA temperature rise 125 °C by resistance; UL maximum temperature rise 135 °C by resistance.; Excitation: 56 V and 4.6 A. The supplied tag also records the alternator reactance and time-constant values, available for the engineering review.; Caterpillar identifies the 3516C model family as diesel generator sets. No unit-specific emissions tier, emissions permit suitability, load-bank result, warranty, low-hour claim or refurbishment claim is established by these photos.; Contact Tommy Marco at 346-276-9540 or tommy@jjtransformers.com for unit pricing, hours, maintenance history, inspection and an itemized equipment and delivery scope. | 100 used Cummins QSK60 G5 units offered; 1.3 MW per unit and 50/60 Hz configurations as specified by J&J.; Every unit has over 7,500 operating hours. Exact hour-meter readings and service records are provided for the selected units.; $575,000 USD per unit, including shipping. Confirm the delivery destination and schedule in the written offer.; Confirm each unit's engine and alternator nameplates, installed frequency, voltage, duty rating, maintenance history and included accessories against the buyer's requirement.; This is a separate used-equipment offer from J&J's 25 brand-new QSK60 units. The new-package datasheet does not establish the used fleet's unit-specific condition or configuration. |
| Evidence reviewed | J&J-supplied equipment and nameplate photos; detailed ratings verified on one photographed unit; quantity of two confirmed by J&J on October 29, 2026 | Current equipment information supplied by J&J |
| Technical value basis | Technical values transcribed from the photographed Caterpillar generator-set nameplate. These values apply to the documented unit; obtain the second unit’s matching nameplate before final selection. | Current equipment information supplied by J&J |
| Details to confirm | Second-unit nameplate, manufacture date, serial identity and matching electrical ratings; Operating hours, starts, service history and present operating condition for each unit; Inspection and load-bank test records; unit-specific emissions configuration and site requirements; Final included auxiliaries, controls, fuel equipment, removal, loading, freight, warranty and release terms | Matching technical records, current condition, complete equipment scope and transport details |
| Represented condition | Pre-owned; pictured installed indoors; operating condition and service history to confirm | Used; every unit has over 7,500 operating hours |
| Technical records reviewed | 2026-10-29 | 2026-10-23 |
| Availability | Two units available, confirmed by J&J October 29, 2026; subject to prior sale and written allocation | Available; subject to prior sale and written allocation |
| Availability last confirmed | 2026-10-29 | 2026-10-23 |
| Shipping estimate | Removal, loading, freight and delivery schedule confirmed with quotation | Shipping included in the $575,000 USD per-unit price; delivery schedule confirmed with quotation |
| Nameplate reviewed | Yes — request the unit package | Not recorded as reviewed; request it |
| Drawings reviewed | Not recorded as reviewed; request them | Not recorded as reviewed; request them |
| Factory test report reviewed | Not recorded as reviewed; request test records | Not recorded as reviewed; request test records |
| This unit only | Request more info | Request more info |
One request
Request Availability for Your Shortlist.
Email Tommy to discuss these options. The listing IDs will already be in the email subject.
What still needs to be checked?
Confirm frequency, cooling-stage ratings, impedance and its base, taps, vector group, grounding, BIL, site conditions and included scope against the project specification. A table cannot approve the fit.
Match the nameplate to the specification · Review surplus equipment records · Procurement checklist